HP250

HP 250 model 45252A (option 004,012)

• 256K RAM
• Internal 8" drive
• External 9133 (3,5" floppy + 15MB hard disk)
• 2631B Line printer

Condition

• Generally works, boots, can print and access HD
• Monitor has mold spots under the front glass. This looks ugly and makes text hard to read.
• Can exchange programs/data with outside world through use of a PC with HPIB card and HPDrive software

To Do

• Fix the mold spots. This is a known problem and has been discussed on the cctech mailing list. E.g. here and here.

Notes

• The 3,5" floppy cannot be used. The media test program included on the B.7.00 system disk shows an X2,3,0 device, but says it is unsupported. Also the hpmuseum.net claims a 250 cannot use 3,5" disks.

• The ROM can only boot from 8" flex disc (see page 351/11 of the HP 250 Service Handbook found on HP Museum). Setting the thumbwheel switch on the processor board to 8. => it ran a memory test. So it must have the old ROMs for which there is no setting to boot anything else than the 9895 8" floppy or a 7910 hard disc.

• With the excellent help from Jon Johnston of HP Museum I was able to restore the missing utilities disc from an image file he sent.

HPDrive

I used HP Drive to exchange software between the 250 and the outside world.

For this I used a pentium 1 PC with Windows 98 and an ISA GP-IB card (NI AT-GPIB/TNT).

Also HPDir allows to access the files from the image or a real HP mass storage device. However I had some trouble using it, it seems to be not entirely compatible.