Difference between revisions of "HP150"

From Hackbox
(To Do)
Line 18: Line 18:
 
== To Do ==
 
== To Do ==
  
* try cleaning the touchscreen LEDs more thoroughly.
+
* try cleaning the touchscreen LEDs more thoroughly or find possible other cause of failure.
 
* transfer software found on hpmuseum.net (see [[ImageDisk]])
 
* transfer software found on hpmuseum.net (see [[ImageDisk]])
 
* swap the drives of the 9121.   
 
* swap the drives of the 9121.   
 
* try to fix the broken drive.
 
* try to fix the broken drive.
 
* use the 9133 from the [[HP250]], the 250 has less need for it because it can use emulated drives.
 
* use the 9133 from the [[HP250]], the 250 has less need for it because it can use emulated drives.

Revision as of 18:30, 13 July 2010

RIMG2977b.JPG

Specification

  • Hewlett-Packard 45611A (HP-150) Serial no. 2348F02441
  • HP 9121D dual 3,5" disc drive Serial no. 2229A20029

Condition

  • boots PAM and DOS 2.11 from original floppy (HP 150 SYS MASTER A.01.04) using the 9121 dual floppy unit.
  • touchscreen doesn't work.
  • the first drive of the 9121 unit is broken.

Done

  • tried to fix the touchscreen as described in the Service Manual: removed bezel and cleaned dust from the LEDs.
  • because the 150 boots from unit 0, I set the working drive to 0 and the other to 1 using the dip switches on the drives inside the unit. Not ideal because drive 1 is marked 0 and vice versa, it would be better to swap the drive slots too.

To Do

  • try cleaning the touchscreen LEDs more thoroughly or find possible other cause of failure.
  • transfer software found on hpmuseum.net (see ImageDisk)
  • swap the drives of the 9121.
  • try to fix the broken drive.
  • use the 9133 from the HP250, the 250 has less need for it because it can use emulated drives.